"; _cf_contextpath=""; _cf_ajaxscriptsrc="/cfthorscripts/ajax"; _cf_jsonprefix='//'; _cf_websocket_port=8578; _cf_flash_policy_port=1244; _cf_clientid='815254FE6B754656E72A8B2FA1FAF276';/* ]]> */
Vibration Isolation Accessories
Air Compressors (PTA512, PTA513, and PTA514)
Air Filter/Regulator (PTA013)
Foot Pump (PTA127)
The PTA512, PTA513, and PTA514 are high-performance air compressors designed for applications demanding the highest quality air supply. They are self contained, lightweight, and compact, with minimal vibrations due to the very low noise emitted (30 dB at 1 m) from the compressor. The oil-lubricated pump unit is fitted with piston rings, thereby eliminating oil carryover to the air supply. These compressors deliver 50% more air than other silent compressors. One common application of these compressors is to provide a constant source of compressed air for active vibration isolation systems, such our active optical table supports or our active ScienceDesk™ tables.
They accept standard 6 mm outer diameter tubing, include an air regulator, filter, receiver tank with pressure gauge, safety valve, drain, line pressure gauge, and a 1/4" OD adapter. They are shipped with a power cord for the appropriate territory, together with a bottle of compressor oil (PTA1006).
Water and particles commonly found in compressed air can be damaging to a vibration isolation system. This compact filter/regulator is recommended for use with all Thorlabs active isolation breadboard support frames. It regulates the air pressure supplied to the isolators while removing moisture and particles down to 5 µm. The fittings are compatible with the 6 mm diameter plastic tubing supplied with the active isolator frames and with the air compressors sold above. Each filter/regulator is shipped with a wall mounting bracket and two 1/4" to 6 mm outer diameter tubing adapters.
The PTA127 is a manual foot pump that can be used to pressurize passive vibration isolation systems where a constant supply of air is not necessary. The foot pump comes with a Schrader-type connector, pressure gauge, and 2 m of hose to allow convenient positioning of the foot pump. Our passive breadboard frames, passive ScienceDesks™, and passive tables legs can all be used with the PTA127 foot pump.