Compact Quick Connect Rotation Stage with Crossed-Roller Bearings

Overview
Vernier Scales
Feedback
Rotation Mounts and Stages

Specifications
Item #	XRNR1(/M)
Coarse Rotation Range	360°, Continuous
Fine Adjustment Range	±5°
Fine Adjustment Resolution (Nominal)	8.33 mrad/rev (0.477°/rev)
Axial Wobble	<500 µrad (0.028°)
Horizontal Load Capacity	Overall: 30 lbs (13.6 kg) Fine Adjustment: 10 lbs (4.54 kg)
Vertical Torque Capacity^a	5 lb-in (0.56 N·m)
Platform Size	Ø2.21" (Ø56.0 mm)
Platform Mounting Holes	1/4"-20 (M6 x 1.0) (13 Places) 8-32 (M4 x 0.7) (4 Places) 6-32 (M4 x 0.7) (4 Places)
Mounted Platform Height	On Breadboard: 0.91" (23.0 mm)^b Dovetail Stacked: 0.83" (21.0 mm)
Base Dimensions	3.35" x 2.52" (85.0 mm x 63.9 mm)
Base Mounting Features	2" Quick Connect Dovetails
Base Mounting Features	Mounting Slot for 1/4"-20 (M6) Cap Screws (4 Places)

The maximum torque about an axis orthogonal to the rotation axis, commonly encountered when the stage's base is mounted on a vertical surface. The center of mass should be as close as possible to the center of rotation.
The stage profile is higher when it is mounted using the screw slots rather than stacked on another stage or accessory with 3" dovetails.

Click to Enlarge
The 2" female dovetails on the bottom of the stage mate with the male dovetails on another stage to form multi-axis configurations. The left female dovetail is on a retractable clamping arm, allowing stages to be dropped into place.

The XRNR1(/M) Rotation Stage provides 360° of coarse rotation
and ±5° of fine rotation. Each stage features 2" dovetails on the top and bottom plate that allow for quick construction of multi-axis systems. The top stage can be locked at any location along the dovetail, allowing for coarse positioning. The base of the stage also has counterbores for mounting directly to optical breadboards.

Features

360° of Continuous Coarse Rotation and ±5° Fine Adjustment
Vernier Scale Provides 5 arcmin Resolution
Radial Crossed-Roller Bearing for High Load Capacity and Low Axial Wobble
Circumference is Laser Engraved at 1° Increments
Quickly Connect XRN25 Series Compact Translation Stages and Accessories Using 2" Dovetails
Tapped Holes for Standard Optomechanics and Clamping Arms
Optional Accessories Provide Additional Functionality:

Vertical Assembly Kits: Mount Stages Orthogonally to Breadboard
Rail Carriers: Removable Plates with Additional Mounting Options
Rail Plate: Deck Height Matches XRN25 Series Stages
Mounting Adapters: Mount 2" Dovetail Stages to 3" Dovetail Stages or Rails
Base Plate: Coarse Alignment of Stage with Table Hole Matrix
Clamping Arms: Provide Clamping Force for Prisms or Other Components

Thorlabs' XRNR1(/M) Rotation Stage provides 360° of continuous manual rotation and features a side-mounted screw for fine adjustment. It also incorporates a radial crossed-roller bearing design for high load capacity and low axial wobble. This dedicated, zero-clearance bearing mechanism also provides an axial constraint for the rotating world, resulting in superior stiffness compared to other bearing types. The top and bottom plates are machined from cast tool and jig aluminum for minimal internal stress and improved stability. The rotating world features an array of mounting holes and 2" male dovetails for compatibility with our XRN25 compact translation stages and the accessories sold below. We also offer the XRR1 Rotation Stage with 3" male dovetails.

When the fine adjustment is disengaged, the stage can be smoothly and continuously rotated by hand through a full 360°, measured by the 1° graduation marks on the circumference of the stage. When the fine adjustment is engaged, the fine adjuster screw provides ±5° of fine adjustment, measured with 5 arcmin resolution by the vernier scale. The end of the adjuster screw incorporates a 5/64" (2.0 mm) hex allowing it to be actuated in space-constrained environments. The adjuster knob can also be removed using a hex key, as illustrated in the video on our kinematic mirror mounts page. The rotating platform is lockable using the 5/64" (2.0 mm) hex screw on the end of the base. The top plate of each stage is tapped with an array of mounting holes. The base can be attached to an optical table or breadboard using the four 1/4" (M6) counterbored clearance slots.

Each stage features 2" quick connect dovetails on the top and bottom plates (as shown in the image above) that allow for quick construction of multi-axis systems using no additional hardware. Refer to the photos in the vertical assembly kits section below to see how multi-axis systems can be quickly constructed using this novel design. The 2" dovetails on our XRNR1(/M) rotation stage are directly compatible with the dovetails on our XRN25 series compact translation stages. Additional functionality is provided by a complete line of accessories that include multi-axis assembly kits, rail carriers, base plates, and stage positioners. An adapter plate for mounting to our larger XR25 and XR50 Series Stages with integrated 3" dovetails is also available. For more information about a specific accessory, please click on the link in the table below.

XRN Compact Quick Connect Rotation Stage Accessories

Rotation Stage	Vertical Assembly Kits	Rail Carriers	Rail Plate

Mounting Adapters	Base Plate	2" Dovetail Rails	Clamping Arms

Click to Enlarge
Figure 1: An example of how to read a vernier scale. The red arrow indicates what is known as the pointer. Since the tick mark labeled 10 on the vernier scale aligns with one of the tick marks on the main scale, this vernier scale is reading 75.60 (in whatever units the tool measures).

Reading a Vernier Scale

Vernier scales are typically used to add precision to standard, evenly divided scales (such as the scale on Thorlabs' rotation mounts). A vernier scale has found common use in many precision measurement tools, the most common being calipers and micrometers. The direct vernier scale uses two scales side-by-side: the main scale and the vernier scale. The vernier scale has a slightly smaller spacing between its tick marks (10% smaller than the main). Hence, the lines on the main scale will not line up with all the lines on the vernier scale. Only one line from the vernier scale will match well with one line of the main scale, and that is the trick to reading a vernier scale.

Figures 1 through 3 show a vernier scale system for three different situations. In each case, the scale on the left is the main scale, while the small scale on the right is the vernier scale. When reading a vernier scale, the main scale is used for the gross number, and the vernier scale gives the precision value. In this manner, a standard ruler or micrometer can become a precision tool.

The 0 on the vernier scale is the "pointer" (marked by a red arrow in Figs. 1 - 3) and will indicate the main scale reading. In Figure 1 we see the pointer is lined up directly with the 75.6 line. Notice that the only other vernier scale tick mark that lines up well with the main scale is 10. Since the vernier 0 lines up with the main scale’s 75.6, the reading from Figure 1 is 75.60 (in whatever units the tool measures in).

That is essentially all there is to reading a vernier scale. It's a very straightforward way of increasing the precision of a measurement tool. To expound, let’s look at Figure 2. Here we see that the pointer is no longer aligned with a scale line, instead it is slightly above 75.6, but below 75.7; thus the gross measurement is 75.6. The first vernier line that coincides with a main scale line is the 5, shown with a blue arrow. The vernier scale gives the final digit of precision; since the 5 is aligned to the main scale, the precision measurement for Figure 2 is 75.65.

Since the vernier scale is 10% smaller than the main scale, moving 1/10 of the main scale will align the next vernier marking. This asks the obvious question: what if the measurement is within the 1/10 precision of the vernier scale? Figure 3 shows just this. Again, the pointer line is in between 75.6 and 75.7, yielding the gross measurement of 75.6. If we look closely, we see that the vernier 7 (marked with a blue arrow) is very closely aligned to the main scale, giving a precision measurement of 75.67. However, the vernier 7 is very slightly above the main scale mark, and we can see that the vernier 8 (directly above 7) is slightly below its corresponding main scale mark. Hence, the scale on Figure 3 could be read as 75.673 ± 0.002. A reading error of about 0.002 would be appropriate for this tool.

As we've seen here, vernier scales add precision to a standard scale measurement. While it takes a bit of getting used to, with a little practice, reading these scales is fairly straightforward. All vernier scales, direct or retrograde, are read in the same fashion.

Click to Enlarge
Figure 2: An Example of a vernier scale. The red arrow indicates the pointer and the blue arrow indicates the vernier line that matches the main scale. This scale reads 75.65.

Click to Enlarge
Figure 3: An Example of a vernier scale. The red arrow indicates the pointer and the blue arrow indicates the vernier line that matches the main scale. This scale reads 75.67, but can be accurately read as 75.673 ± 0.002.

Posted Comments:
No Comments Posted

Rotation Mount and Stage Selection Guide

Thorlabs offers a wide variety of manual and motorized rotation mounts and stages. Rotation mounts are designed with an inner bore to mount a Ø1/2", Ø1", or Ø2" optic, while rotation stages are designed with mounting taps to attach a variety of components or systems. Motorized options are powered by a DC Servo motor, 2 phase stepper motor, piezo inertia motor, or an Elliptec™ resonant piezo motor. Each offers 360° of continuous rotation.

Manual Rotation Mounts

Rotation Mounts for Ø1/2" Optics
Item #	MRM05(/M)	RSP05(/M)	CRM05	PRM05(/M)^a	SRM05	KS05RS	CT104
Click Photo to Enlarge
Features	Mini Series	Standard	External SM1 (1.035"-40) Threads	Micrometer	16 mm Cage-Compatible	±4° Kinematic Tip/Tilt Adjustment Plus Rotation	Compatible with CT1 Cage Translator Stage and 1/4" Translation Stages^b
Additional Details

This mount is available in the PRM05GL5 bundle, which includes the PRM05 rotation mount with the SM05PM5 polarizing prism mount.
The CT104 is complatible with the 1/4" translation stages using our MS103(/M) adapter plate.
The CT104 is compatible with the CT1 cage translation stage, which is designed for use with 30 mm cage systems.

Rotation Mounts for Ø1" Optics
Item #	RSP1(/M)	LRM1	RSP1D(/M)	DLM1(/M)	CLR1(/M)	RSP1X15(/M)	RSP1X225(/M)	PRM1(/M)^a
Click Photo to Enlarge
Features	Standard	External SM1 (1.035"-40) Threads	Adjustable Zero	Two Independently Rotating Carriages	Rotates Optic Within Fixed Lens Tube System	Continuous 360° Rotation or 15° Increments	Continuous 360° Rotation or 22.5° Increments	Micrometer
Additional Details

This mount is available in the PRM1GL10 bundle, which includes the PRM1 rotation mount with the SM1PM10 polarizing prism mount.

Rotation Mounts for Ø1" Optics
Item #	LM1-A & LM1-B(/M)	CRM1(/M)	CRM1L(/M)	CRM1P	KS1RS	K6XS
Click Photo to Enlarge
Features	Optic Carriage Rotates Within Mounting Ring	30 mm Cage-Compatible^a	30 mm Cage-Compatible for Thick Optics^a	30 mm Cage-Compatible with Micrometer^a	±4° Kinematic Tip/Tilt Adjustment Plus Rotation	Six-Axis Kinematic Mount^a
Additional Details

This mount also features four 4-40 (M3) holes on the rotation dial for use with the K6A1(/M) prism platform.

Rotation Mounts for Ø2" Optics
Item #	RSP2(/M)	RSP2D(/M)	PRM2(/M)	LM2-A & LM2-B(/M)	LCRM2(/M)	KS2RS	K6X2
Click Photo to Enlarge
Features	Standard	Adjustable Zero	Micrometer	Optic Carriage Rotates Within Mounting Ring	60 mm Cage-Compatible	±4° Kinematic Tip/Tilt Adjustment Plus Rotation	Six-Axis Kinematic Mount
Additional Details

Manual Rotation Stages

Manual Rotation Stages
Item #	RP005(/M)	PR005(/M)	MSRP01(/M)	RP01(/M)	RP03(/M)	QRP02(/M)
Click Photo to Enlarge
Features	Standard					Two Hard Stops
Additional Details

Manual Rotation Stages
Item #	XRNR1(/M)	XRR1(/M)	PR01(/M)	CR1(/M)	XYR1(/M)	OCT-XYR1(/M)
Click Photo to Enlarge
Features	Fine Rotation Adjuster and 2" Wide Dovetail Quick Connect	Fine Rotation Adjuster and 3" Wide Dovetail Quick Connect	Fine Rotation Adjuster and SM1-Threaded Central Aperture	Fine Pitch Worm Gear	Rotation and 1/2" Linear XY Translation
Additional Details

The stage profile is higher when it is mounted using the screw slots rather than stacked on another stage or accessory with mating dovetails.
The OCT-XYR1(/M) stage includes the XYR1A solid sample plate. This plate can be detached from the stage to reveal the same mounting features present on the XYR1(/M) stage.

Motorized Rotation Mounts and Stages

Motorized Rotation Mounts and Stages with Central Clear Apertures
Item #	DDR25(/M)	PDR1(/M)	K10CR1(/M)	PRM1Z8(/M)^a	DDR100(/M)	ELL14	HDR50(/M)
Click Photo to Enlarge
Features	Compatible with SM05 Lens Tubes, 16 mm Cage System, 30 mm Cage System	Compatible with SM05 Lens Tubes, 30 mm Cage System, PD1(/M) Linear Stages	Compatible with SM1 Lens Tubes & 30 mm Cage System		Compatible with SM1 Lens Tubes, 16 mm Cage System, 30 mm Cage System	Compatible with SM1 Lens Tubes, Open Frame Design for OEM Applications	Compatible with SM2 Lens Tubes
Additional Details

Motor Type	Brushless DC Servo	Piezo Inertia Drive	2 Phase Stepper Motor with Worm Gear	DC Servo	Brushless DC Servo	Piezo Resonant Motor	2 Phase Stepper Motor with Worm Gear
Rotation Adjustment Range	360° Continuous
Rotating Platform/Carriage
Diameter	Ø1.14" (Ø29.0 mm)	1.34" (34.0 mm)	Ø1.81" (Ø46.0 mm)	Ø1.97" (Ø50.0 mm)	Ø4.37" (111.0 mm)	-	Ø3.86" (Ø98.0 mm)
Height	1.12" (28.5 mm)	0.71" (18.0 mm)	0.84" (21.5 mm)	0.91" (23.0 mm)	1.57" (39.9 mm)	0.59" (15.1 mm)	1.73" (44.0 mm)
Threaded Mounting Holes	Four 4-40 with 16 mm Spacing	Four 8-32 (M4)	Six 4-40 (M3)	Four 6-32 (M4), Four 8-32 (M4), Four 4-40 with 30 mm Spacing	Eight 8-32 (M4), Four 1/4"-20 (M6), Four 4-40 with 16 mm Spacing, Four 4-40 with 30 mm Spacing	-	Four 8-32 (M4)
Center Aperture	SM05 Internal Threads, 1.2" (28.5 mm) Deep	Ø9.0 mm Clear Aperture with SM05 Internal Threads, 2.5 mm Deep	SM1 Internal Threads, 0.84" (21.5 mm) Deep	SM1 Internal Threads, 0.91" (23.0 mm) Deep	SM1 Internal Threads, 0.82" (21.0 mm) Deep	SM1 Internal Threads, 0.58" (14.7 mm) Deep	Ø50.0 mm Clear Aperture with SM1 Internal Threads, 6.9 mm Deep
Speed (Max)	1800°/s	20°/s	10°/s	25°/s	1080°/s	430°/s	50°/s
Platform Adapter Plate(s)	-	-	K10CR1A2(/M)	PRM1SP1(/M)	NR360SP9(/M) NR360SP4(/M)	-	NR360SP9(/M) NR360SP8 NR360SP4(/M)
Base
Dimensions	2.19" x 2.19" (55.6 mm x 55.6 mm)	1.57" x 1.57" (40.0 mm x 40.0 mm)	4.21" x 2.60" (107.0 mm x 66.0 mm)	5.18" x 3.26" (131.5 mm x 82.8 mm)	4.53" x 4.53" (115 mm x 115 mm)	2.60" x 3.25" (66.0 mm x 82.5 mm)	7.46" x 4.55" (189.4 mm x 115.5 mm)
Stage Adapter Plates	-	-	K10CR1A1 K10CR1A3	PRM1SP2 PRM1SP3	-	-	NR360SP2(/M) NR360SP5(/M)
Bottom Surface Mounting Holes	-	Two 8-32 (M4)	-	Two 1/4" (M6) Counterbores	Four 1/4" (M6) Clearance Holes	-	Four 1/4" (M6) Counterbores
Side Holes for Vertical Mounting	Four 8-32 (M4) Eight 4-40	One 8-32 (M4), Two Sides	Three 8-32 (M4)	Four 8-32 (M4)	Eight 1/4"-20 (M6)	-	Six 1/4"-20 (M6)
Cage System Compatibility	Four 4-40 Holes on Back Side with 16 mm Spacing, Four 4-40 Taps on Front Side with 30 mm Spacing	Ø6 mm Holes for ER Cage Rods with 30 mm Spacing	Four 4-40 Holes on Each Side with 30 mm Spacing	-	Four 4-40 Holes on Back Side with 30 mm Spacing	60 mm Cage using Four 0.12 (3.0 mm) Holes for 4-40 Screws, 30 mm Cage using SR025 Cage Rods to Adapt to ER Cage Rods	-

This stage is available in the KPRMTE(/M), which includes the PRMTZ8(/M) Motorized Rotation Stage with the KDC101 K-Cube DC Servo Motor Controller.

Motorized Rotation Mounts and Stages with Tapped Platforms
Item #	PRMTZ8(/M)^a	ELL18(/M)^b
Click Photo to Enlarge
Features	Tapped Mounting Platform for Mounting Prisms or Other Optics	Tapped Mounting Platform, Open Frame Design for OEM Applications
Additional Details

This stage is available in the KPRM1E(/M), which includes the PRMT1Z8(/M) Motorized Rotation Stage with the KDC101 K-Cube DC Servo Motor Controller.
This stage is available in the ELL18K(/M), which includes an interface board, mounting brackets, and connectors for PC control.

Compact Rotation Stage with Crossed-Roller Bearing and Quick Connect 2" Dovetail Mounting

Compact Rotation Stage with Crossed-Roller Bearing and Quick Connect 2in Dovetail Mounting

Zoom

Click for Details
XRNR1/M Rotating World Features

Click for Details
XRNR1 Rotating World Features

Coarse Manual Rotation and ±5° Fine Adjustment
Rotation Locking Screw with 5/64" (2.0 mm) Hex
Four Slots for Breadboard Mounting with 1/4"-20 (M6) Screws
Directly Compatible with XRN25 Series Compact Translation Stages Using 2" Mating Dovetail
- Do Not Exceed 15 in•lbs of Torque when Tightening Clamping Arm
XRN-A1 Adapter (Sold Separately) Enables Compatibility with XR25 and XR50 Series Translation Stages

The XRNR1(/M) Compact Rotation Stage provides 360° of continuous manual rotation and features a side-mounted fine adjuster screw which rotates the platform 8.33 mrad (0.477°) per revolution. The top plate of each stage is tapped with an array of mounting holes as illustrated in the diagrams on the right.

This stage and our other compact stages with integrated 2" mating dovetails can be easily stacked and secured to one another. The stages are secured by a single dovetail locking mechanism with a 3/16" (5 mm) hex. The mating dovetail also allows this stage to be used with the variety of accessories below.

Vertical Stage Assembly Kits

Zoom

Click for Details
XRNR1 Rotation Stage Mounted on XRN25P Translation Stage Using XRN-YZ Kit

Click for Details
XRNR1 Rotation Stage Mounted on XRN25P Translation Stage Using XRN-XZ Kit

Click for Details
XRNR1 Rotation Stage Mounted Vertically Using XRN-XZ Kit
and XRN-B1 Base Plate

Kits Consist of Angle Bracket and Mounting Plate
Support Vertical Mounting Configurations
Compatible with 3" Mating Dovetail Stages
- Dovetail Clamp Screw has a Max Torque of 15 in•lbs

The XRN-XZ(/M) and XRN-YZ(/M) Assembly Kits enable vertical mounting of an XRNR1(/M) Rotation Stage. These assembly kits can be directly mounted onto a base plate or onto our XRN25 Series Compact Translation Stages, as illustrated in the photos to the right. When used to mount the rotation stage vertically on a linear translation stage, the XRN-XZ kit positions the surface of the rotation stage parallel to the direction of linear motion, while the XRN-YZ kit would orient the rotation stage platform perpendicular to the direction of motion.

Each kit includes an angle bracket and a mounting plate. The female dovetail on the rotation stage attaches to one of the mounting plate's male dovetails. The mounting plate's other male dovetail is then mated to an arm of the angle bracket. The other arm of the angle bracket attaches to the base plate or translation stage.

Mounting Adapters

Zoom

XRN-A1 Adapter Enables Perpendicular Mounting of 2" Dovetail Components onto 3" Dovetail Components
XRN-A2 Adapter Enables Parallel Mounting of 2" Dovetail Components onto 3" Dovetail Components
Adapters Add 0.275" (7.0 mm) to the Overall Stacked Height of Components

These adapters enable mounting of quick connect, crossed-roller bearing stages or accessories with a female 2" dovetail to components with a male 3" dovetail, as illustrated in the photos below. The XRN-A1 adapter enables perpendicular mounting while the XRN-A2 enable parallel mounting. The second photo below illustrates a parallel mounting configuration with a smaller footprint.

To assemble, first loosen the dovetail locking screw on the end of the top stage or accessory. Position the adapter on the bottom stage or rail, as illustrated in the photos below, then align the top component on the adapter. Lastly, tighten the dovetail locking screw (maximum torque: 15 in•lbs) on the end of the top component until the entire assembly is secure. Please note that the deep-set screws in the sides of the adapter are not user adjustable.

Click to Enlarge
XRNR1 Stage Mounted onto XR25DR Rail Using XRN-A2 Adapter

Click to Enlarge
XRNR1 Compact Rotation Stage Mounted onto XR25P Translation Stage Using XRN-A1 Adapter

Mounting Adapter Compatibility
Item #	Orientation	Top Component	Bottom Component
XRN-A1	Perpendicular	XRN25 Series XRNR1 Stages	XR25 Series XR50 Stages XRR1 Stages
XRN-A2	Parallel	XRN25 Series XRNR1 Stages	XR25 Series XR50 Stages XRR1 Stages

Stage Base Plate

Zoom

Click to Enlarge
Stages can be mounted vertically using a vertical assembly kit and the XRN-B1 base plate.

1.26" Long, 1/4" (M6) Counterbored Slots for Additional Mounting Flexibility
Orthogonal Male Dovetails for Two Stage Mounting Orientations
Compatible with 2" Mating Dovetail Stages

The XRN-B1(/M) baseplate offers additional mounting flexibility for coarse positioning of the XRNR1(/M) rotation stage within a setup. Three 1.26" long, 1/4" (M6) counterbored slots allow for coarse translation adjustment of the stage. The orthogonal dovetails on the top of the XRN-B1 allow the stage to be mounted in two orientations. The middle slot is designed to be secured by two 1/4"-20 (M6) cap screws onto an optical table or breadboard, which allows the stage to be aligned with the table's or breadboard's hole pattern.

Vertical Stage Configuration
For situations where a vertically mounted rotation stage is needed, either the XRN-XZ or the XRN-YZ angle bracket (sold above) can be secured directly to the baseplate. This configuration is illustrated in the photo to the right and described in more detail in the Vertical Assembly Kits section above.

Clamping Arms

Zoom

Click for Details
Mechanical Drawings

Provide Clamping Force for Our Platform Mounts
Threaded Hole on Top and Threaded Stud on Bottom of Post
- 6-32 Threads on PM3 and PM4
- 8-32 Threads on PM5
- M4 x 0.7 Threads on All Metric Versions
Maximum Optic Heights from 0.97" to 1.65" (24.6 mm to 41.8 mm)
Extension Posts Available to Increase Max Optic Height
- PM3SP(/M) with PM3(/M): Hold Optics up to 2.21" (56.1 mm) Tall
- PM4SP(/M) with PM4(/M): Hold Optics up to 3.61" (91.7 mm) Tall

Click to Enlarge
Clamping Arm Extension Posts with Metric Indicator Groove

Thorlabs' Clamping Arms provide clamping force to secure optics to our kinematic platform mounts, stages, and V-clamps. The PM3(/M) accommodates optics up to 0.97" tall and features a 0.69" center-to-center distance between the post and the nylon-tipped setscrew that holds the optic. The PM4(/M) accommodates optics up to 1.61" and features a 1.16" center-to-center distance between the post and the nylon-tipped setscrew. The maximum optic height of the PM3(/M) or PM4(/M) Clamping Arms can be extended using our PM3SP(/M) or PM4SP(/M) Extension Posts, respectively. These extension posts are identical to the posts included in each complete clamping arm. Each clamping arm features 6-32 (M4 x 0.7) threads. The PM3 and PM4 can be mounted in 8-32 tapped holes by using the AS6E8E thread adapter, which features internal 6-32 threads and external 8-32 threads. This thread adapter has an outer diameter of 0.24", which is the same as the PM4SP extension post and the post included with the PM4 clamping arm. This allows the clamping arm to be adjusted across the seam between either post and the adapter. The smaller diameters of the included post for the PM3 clamping arm and the PM3SP extension post cause the thread adapter to act as a stop for the clamping arm.

The PM5(/M) clamping arm is made entirely from heat-treated stainless steel, which helps maintain stability in fluctuating temperatures and provides vacuum compatibility. This clamping arm is recommended for use with the POLARIS-K1M4(/M), but it can be used with any platform mount or stage that has one or more 8-32 (M4 x 0.7) tapped holes. The PM5(/M) can hold optics up to 1.65" tall, and the distance from the post center to the contact point that holds the optic is 0.90".

Each clamping arm is attached to its post using a flexure mechanism that locks with a 5/64" (2.0 mm) balldriver or hex key. The setscrew on top of the clamping arm also accepts a 5/64" (2.0 mm) balldriver or hex key in order to clamp down on the optic. The post includes a through hole which can be leveraged for added torque when tightening down the post. Please see the diagram above for additional information.

Based on your currency / country selection, your order will ship from Newton, New Jersey

+1 Qty Docs Part Number - Imperial Price Available

PM3	Small Adjustable Clamping Arm, 6-32 Threaded Post

$19.91

Today

PM3SP Customer Inspired! Extension Post for PM3 Clamping Arm, 6-32 Threaded

$5.52

Today

PM4	Large Adjustable Clamping Arm, 6-32 Threaded Post

$24.35

Today

PM4SP Customer Inspired! Extension Post for PM4 Clamping Arm, 6-32 Threaded

$5.52

Today

PM5	Stainless Steel Adjustable Clamping Arm, 8-32 Threaded Post

$60.47

Today

+1 Qty Docs Part Number - Metric Price Available

PM3/M Small Adjustable Clamping Arm, M4 x 0.7 Threaded Post

$19.91

Today

PM3SP/M Customer Inspired! Extension Post for PM3/M Clamping Arm, M4 x 0.7 Threaded

$5.52

Today

PM4/M Large Adjustable Clamping Arm, M4 x 0.7 Threaded Post

$24.35

Lead Time

PM4SP/M Customer Inspired! Extension Post for PM4/M Clamping Arm, M4 x 0.7 Threaded

$5.52

Today

PM5/M Stainless Steel Adjustable Clamping Arm, M4 Threaded Post

$60.47

Today

View All »Matching Part Numbers

Compact Quick Connect Rotation Stage with Crossed-Roller Bearings

Features

Reading a Vernier Scale

Rotation Mount and Stage Selection Guide

Manual Rotation Mounts

Manual Rotation Stages

Motorized Rotation Mounts and Stages

Compact Rotation Stage with Crossed-Roller Bearing and Quick Connect 2" Dovetail Mounting

Vertical Stage Assembly Kits

Mounting Adapters

Stage Base Plate

Clamping Arms