Cage-Compatible Diffuse Backlight LED


  • LED Backlight with Ø25 mm Diffused Aperture Size
  • Integrates with 30 mm Cage Systems
  • Compatible with Thorlabs' LED Drivers

Application Idea

The LEDD1B T-Cube LED Driver can be used to drive the LEDBW1 Backlight LED. 

LEDBW1

Ø25 mm Diffuse Backlight LED, Cold White

Related Items


Please Wait
Item # LEDBW1
Min Typical  Max
LED Power Outputa.b 251 mW 358 mW -
Forward Voltagea,b - 3.9 V -
Maximum Irradiancea,b,c - 6.3 µW/mm2 -
General Specifications
Color Cold White
Correlated Color Temperatured 6500 K
Diffused Aperture Sizee Ø25 mm
Maximum Current (CW)a 2000 mA
Electrical Powera 7800 mW
Typical Lifetimea 100 000 h
Operating Temperaturef 0 to 40 °C
Storage Temperature -40 to 70 °C
Risk Groupg RG0 - Exempt
Output Spectrumd
(Click to View)

Click Here for Raw Data
  • Measured at 25 °C
  • When Driven with the Maximum Current
  • Measured at a Distance of 200 mm
  • Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual spectral output of any given LED will vary. Correlated color temperature specs are only intended to be used as a guideline.
  • To discuss alternative diffused aperture sizes, please contact Tech Support.
  • Non-Condensing
  • According to the Standard IEC 62471:2006, Photobiological Safety of Lamps and Lamp Systems
LEDBW1 Bottom Light LED with LEDD1B Driver and CFS1M Filter Mount
Click to Enlarge
The CFS1(/M) Sliding Filter Mount can be used with the LEDBW1 Cage-Compatible LED Backlight to filter specific wavelength ranges of the output.

Features

  • High-Power Diffuse Illuminator Ideal for Machine Vision Applications
  • Ø25 mm Diffused Aperture Size
  • 100 000 Hour Lifetime
  • Compatible with Our 30 mm Cage System 
  • Low-Profile Housing
  • Integrated Memory (EEPROM) Stores LED Operating Parameters
  • Integrated M8 Connector for use with Thorlabs' LED Drivers

Thorlabs' Cage-Compatible Diffuse Backlight LED is a high-power, cold white LED that provides stable, uniform illumination. By integrating a Ø25 mm diffused window, this LED backlight produces a flatter field of illumination as compared to a point source, making it ideal for machine vision applications.

Constructed from anodized aluminum, this LED housing features four through holes that are compatible with our Ø6 mm ER cage rods. This allows for integration with our 30 mm cage systems and DIY Cerna components, such as the CSA1001 Fixed Arm. Each cage rod through hole is accompanied by two side-located locking setscrews, which can be secured using a 5/64" (2.0 mm) hex key or balldriver.

To ensure proper operation and to maximize operating lifetime, this LED backlight must be mounted onto an appropriate heat sink; the housing includes four counterbored slots that accept 1/4" (M6) cap screws (not included) for compatibility with both imperial and metric hole patterns. For convenient connection to the drivers listed on the LED Drivers tab, this LED backlight has a connection cable with an M8 connector; see the Pin Diagrams tab for the M8 connector pin information.

This LED backlight features an EEPROM chip which stores information about the LED (e.g., current limit, forward voltage). When controlled by a Thorlabs DC2200, DC4100DC4104, or UPLED LED driver, the data can be used to implement smart safety features.

White Light LEDs
This illuminator is a cold white LED featuring a broad spectrum that spans several hundred nanometers; see the table to the right for a typical output spectrum. It has a correlated color temperature of 6500 K, which indicates that the color appearance is similar to a black body radiator at the same temperature. In general, a cold white LED has a stronger blue component to the spectrum than a warm white or neutral white LED. Compared to warm white LEDs, cold white LEDs are more suitable for fluorescence microscopy applications or use with cameras with white balancing due to their higher intensity at most wavelengths. To discuss LED backlights with other correlated color temperatures or nominal wavelengths, please contact Tech Support.

Driver Options
Thorlabs offers five drivers compatible with this LED backlight: DC2200, UPLED, LEDD1B, DC4100, and DC4104 (the latter two require the DC4100-HUB). See the LED Drivers tab for compatibility information and a list of specifications. We recommend using the DC2200 for applications that require the full power of the LED; the LEDBW1 LED has a higher maximum current rating than the the UPLED, LEDD1B, DC4100 and DC4101 drivers are able to provide, which will limit the achievable LED output power when used with these drivers. In addition, the DC2200, DC4100, DC4104, and UPLED drivers are capable of reading the current limit from the EEPROM chip of the connected LED and automatically adjusting the maximum current setting to protect the LED.

Please note that this LED backlight is not intended for use in household illumination applications.

Thorlabs also offers a range of unmounted, mounted, collimated, and fiber-coupled LEDs that are designed for a variety of applications, including microscopy, illumination, and measurements. For questions on choosing an appropriate LED and to discuss mounting requirements, please contact Tech Support.

Pin Out
Pin Specification Color
1 LED Anode Brown
2 LED Cathode White
3 EEPROM GND Black
4 EEPROM IO Blue

Pin Connection - Male

The diagram to the right shows the male connector of the LEDBW1 Backlight. It is a standard M8 x 1 sensor circular connector. Pins 1 and 2 are the connection to the LED. Pin 3 and 4 are used for the internal EEPROM. If using an LED driver that was not purchased from Thorlabs, be careful that the appropriate connections are made to Pin 1 and Pin 2 and that you do not attempt to drive the LED through the EEPROM pins.

Compatible Drivers UPLEDa LEDD1Bb DC2200a DC4100a,c,d DC4104a,c,d
Click Photos to Enlarge upLED Driver LEDD1B Driver DC2100 Driver DC4100 Driver DC4104 Driver
LED Driver Current Output (Max) 1.2 A 1.2 A LED1 Terminal: 10.0 A
LED2 Terminal: 2.0 Ae
1.0 A per Channel 1.0 A per Channel
LED Driver Forward Voltage (Max) 8 V 12 V 50 V 5 V 5 V
Modulation Frequency Using External Input (Max) - 5 kHz 250 kHzf,g 100 kHzg
(Simultaneous Across All Channels)
100 kHzg
(Independently Controlled Channels)
External Control Interface(s) USB 2.0 Analog (BNC) USB 2.0 and Analog (BNC) USB 2.0 and Analog (BNC) USB 2.0 and Analog (8-Pin)
Main Driver Features USB-Controlled Very Compact Footprint
60 mm x 73 mm x 104 mm
(W x H x D)
Touchscreen Interface with Internal
and External Options for Pulsed
and Modulated LED Operation
4 Channelsd 4 Channelsd
EEPROM Compatible: Reads Out LED Data for LED Settings Yes - Yes Yes Yes
LCD Display - - Yes Yes Yes
  • Automatically Adjusts the Driver's Current Limit via EEPROM Readout from LED
  • An LED with a maximum current rating higher than 1.2 A can be driven using this driver, but will not reach full power.
  • The DC4100 and DC4104 can power and control up to four LEDs simultaneously when used with the DC4100-HUB. The LEDBW1 requires the DC4100-HUB when used with the DC4104 driver.
  • An LED with a maximum current rating higher than 1.0 A can be driven using this driver, but will not reach full power.
  • The LED sold below is compatible with the LED2 Terminal.
  • Small Signal Bandwidth: Modulation not exceeding 20% of full scale current. The driver accepts other waveforms, but the maximum frequency will be reduced.
  • The LEDBW1 produces light by stimulating emission from phosphor, which limits the modulation frequency. As a white LED, the LEDBW1 may not turn off completely when modulated above 10 kHz at duty cycles below 50%.

Posted Comments:
No Comments Posted

Cage-Compatible LED Backlight

Based on your currency / country selection, your order will ship from Newton, New Jersey  
+1 Qty Docs Part Number - Universal Price Available
LEDBW1 Support Documentation
LEDBW1NEW!6500 K, 251 mW (Min) 30 mm Cage-Compatible Diffuse Backlight LED, 2000 mA
$365.91
Today