"; _cf_contextpath=""; _cf_ajaxscriptsrc="/cfthorscripts/ajax"; _cf_jsonprefix='//'; _cf_websocket_port=8578; _cf_flash_policy_port=1244; _cf_clientid='0E2DE452D6C3E23D7B8C51F93A276D8D';/* ]]> */
Ø2" Adapters for Unmounted Optics
Ø1" Smooth Central Bore
Internally M42.5 x 0.5 Threaded
Ø1.51" Smooth Central Bore,
Thorlabs offers these Ø2" adapters for unmounted optics to easily integrate various optic diameter standards into Ø2" optomechanical systems, including optic mounts and lens tubes (see the Selection Guide to the right). The unthreaded adapters presented here are double-bored to provide 2 lines of mounting contact for Ø1", Ø30 mm, or Ø1.5" optics. Our externally SM2- (2.035"-40) threaded adapters with internally threaded central bores can house optics ranging from Ø30 mm to Ø48 mm. A Ø2" adapter with internal SM1 (1.053"-40) threading for Ø1" optics and and externally SM2-threaded adapters with smooth central bores for components are also available.
Thorlabs also offers Ø1" adapters for unmounted optics.
Click to Enlarge
Ø1" Optic Mounted in a Ø2" KM200 Mirror Mount Using an AD2 Adapter
These unthreaded adapters feature a smooth Ø2" outer surface and a double-bored counterbore to provide two lines of mounting contact. The counterbores in the AD2, AD2-30, and AD2-1.5 are Ø1", Ø30 mm and Ø1.5", respectively. Optics are secured against the two contact lines using a nylon-tipped setscrew.
Click to Enlarge
The AD2-CA Adapter Allows Separation of Closely Spaced Beams Using Ø1" Optics
The AD2-CA is designed with a 2" outer diameter and dual Ø1" internal bores. Please note that only one internal bore is meant for mounting the optic, which is held in place with an 8-32 nylon-tipped setscrew. This adapter enables separation of closely spaced beams with Ø1" circular optical components and is ideal for applications that require a narrow-angle back reflection. If you wish to mount one of our D-shaped mirrors, we recommend using one of our D-shaped mirror mounts.
Click to Enlarge
Ø1" Optic in Threaded SM1 Lens Tube Mounted in Ø2" KM200 Mirror Mount Using an AD2T Adapter
The AD2T Adapter features internal SM1 threading and is designed to hold a Ø1" unmounted optic up to 0.37" (9.4 mm) thick with the included SM1RR retaining ring.b Alternatively, retaining rings can be used to hold this adapter in an SM2 lens tube. With a smooth outer diameter, the AD2T is especially well suited for mounting Ø1" wave plates into Ø2" mounts.
These adapters feature external SM2 threads and center bores through the length of each part. The SM2B2 adapter has a 0.05" hex setscrew that secures Ø1.5" objects. The SM2A21 adapter has a 5/64" (2 mm) hex nylon-tipped setscrew, secures Ø1.2" components, and also features a 2.00" (50.8 mm) outer diameter. This allows the SM2A21 to be used with Ø2" optic mounts, such as the KM200. Both mounts feature SM2 threads, allowing them to be mounted in our SM2 Lens Tubes and SM2-compatible mounts.
These externally SM2-threaded adapters are designed to mount optics between Ø30 mm and Ø48 mm in internally SM2-threaded components, such as our Ø2" Lens Tubes or Ø2" Optic Mounts. Each mount features external SM2 threads and an internally threaded central bore (see the table below for thread specifications). Two retaining rings are included for securing optics in the adapter.